Careers in the Classroom
All connections

Classroom example ENMAX

Show your class · 1 of 5

The question

Show your class · 2 of 5

How it works

Show your class · 3 of 5

Who does this work

Show your class · 4 of 5

Ways in

Show your class · 5 of 5

Ask the class

For you

About ENMAX

For you

Sources

Why use the heat left over from making electricity to make more electricity?

ENMAX · Company identifies Shepard Energy Centre in southeast Calgary; joint venture with Capital Power, operated by ENMAX.

Graphic-novel illustration. Plant operator reviewing the energy flow through two generating stages.

Where it fits

Pick your class
  • Science 10 · Unit B, outcome 3 — energy conservation and thermal-system efficiency

How it works

Schematic · not to scale

The heat leaving one machine can become an input to another.

Exhaust heat from gas-turbine generation supplies a steam stage that produces additional electricity.
  1. Natural gas supplies energy to a gas-turbine stage, which drives electrical generation.

  2. Hot exhaust still carries energy after that first stage.

  3. Heat recovery uses some of that exhaust energy to make steam for another turbine and generator.

  4. Additional electrical output comes from the same initial energy supply, but losses and heat rejection remain. A complete energy account must include them.

The numbers are invented and are not Shepard performance data. Distinguish energy from power; do not use MW as if it were an amount of energy. A power engineer is an operational profession with its own certification path, distinct from professional engineering registration.

The lesson, in the real world

The heat leaving one machine can become an input to another.

  1. 1

    Natural gas supplies energy to a gas-turbine stage, which drives electrical generation.

    Our explanation
  2. 2

    Hot exhaust still carries energy after that first stage.

    Our explanation
  3. 3

    Heat recovery uses some of that exhaust energy to make steam for another turbine and generator.

    Our explanation
  4. 4

    Additional electrical output comes from the same initial energy supply, but losses and heat rejection remain. A complete energy account must include them.

    Our explanation
Source: enmax.com — natural gas fuelled(opens in a new tab); enmax.com — generation(opens in a new tab); enmax.com — careers(opens in a new tab); alis.alberta.ca — power engineer(opens in a new tab); education.alberta.ca — science10.pdf(opens in a new tab)

Who does this work

Roles connected to this example

What each kind of work involves, the job titles to look for, and where to find postings in Calgary.

  • Process and plant operations

    Keep processing equipment running safely and learn from its measurements.

    Classroom connection
    A separation method must work repeatedly. Careful measurements help explain why performance changes between trials.

    Job titles to search
    Plant operator · Process operator · Power engineer

    Related work inferred from generation and operations sources; not a verified vacancy.
  • Instrumentation and controls

    Keep a process measurable and responsive. Controls work connects sensors, decisions and actuators so the system can respond when conditions change.

    Classroom connection
    Feedback uses a measured result to inform the next action.

    Job titles to search
    Instrumentation technician · Controls technician · Controls engineer

    Related work inferred from generation and operations sources; not a verified vacancy.
  • Mechanical design and prototyping

    Translate a need into a component or machine that can be built and tested. Designers use dimensions, material properties and constraints to evaluate alternatives.

    Classroom connection
    Geometry, forces and material properties shape real design trade-offs.

    Job titles to search
    Mechanical designer · Mechanical engineer

    Related work inferred from generation and operations sources; not a verified vacancy.

Cards distinguish work documented at ENMAX from related work at other employers. Dated accounts and postings are not a current staff roster or a promise of a vacancy.

Ways in

For your students

Ways to prepare for this work

Programs that teach skills this work uses. Each is one route in, not a requirement, and no program has endorsed this page.

  • SAITDiplomaCalgary

    Power Engineering Technology

    Thermal-energy systems and plant operations.

    About this route

    Power-engineer certification requires its applicable exams and experience; this is distinct from a professional engineering degree. Check current admissions and intake before applying; this draft does not promise entry or employment.

    Why it connects to the work · our interpretation

    Process and plant operations

    Thermal-energy systems and plant operations. Energy diagrams become real operating systems with constraints and losses.

  • SAITDiplomaCalgary

    Instrumentation Engineering Technology

    Measurement, calibration and process controls.

    About this route

    Related to sensor/control work; no guaranteed employer placement. Check current admissions and intake before applying; this draft does not promise entry or employment.

    Why it connects to the work · our interpretation

    Instrumentation and controls

    Measurement, calibration and process controls. A reading depends on where and how it was measured, not just the number displayed.

  • University of CalgaryBScCalgary

    Mechanical Engineering

    Design using mechanics, materials and energy.

    About this route

    Professional engineering registration is a separate process. Check current admissions and intake before applying; this draft does not promise entry or employment.

    Why it connects to the work · our interpretation

    Mechanical design and prototyping

    Design using mechanics, materials and energy. A model is useful when its assumptions are clear and measurements can challenge it.

Ask the class

Use it in class

Ask the class

Why does adding a second generating stage not mean that the plant has created extra energy?

Use a fictional energy budget: input 100 units; first electrical output 35; second electrical output 20; remaining 45 to other transfers. Compare 35% and 55% model efficiencies and explain where the second stage's input comes from.

Mindset it shows

The numbers are invented and are not Shepard performance data. Distinguish energy from power; do not use MW as if it were an amount of energy. A power engineer is an operational profession with its own certification path, distinct from professional engineering registration.

About ENMAX

The heat leaving one machine can become an input to another.

Headquarters
Headquarters not separately verified for this example.
Local connection
Company identifies Shepard Energy Centre in southeast Calgary; joint venture with Capital Power, operated by ENMAX.
Source: enmax.com — natural gas fuelled(opens in a new tab); enmax.com — generation(opens in a new tab); enmax.com — careers(opens in a new tab); alis.alberta.ca — power engineer(opens in a new tab)
Team size
Not verified. We have not found a dated, sourced figure.

ENMAX operates Shepard Energy Centre, a combined-cycle natural-gas generating facility in southeast Calgary, through a joint venture with Capital Power. Its generation information describes gas turbines and a steam turbine. The classroom story follows the energy: exhaust heat from the first stage helps produce additional electricity in the next. It does not present this as zero-emission or loss-free generation.

Source: enmax.com — natural gas fuelled(opens in a new tab); enmax.com — generation(opens in a new tab); enmax.com — careers(opens in a new tab); alis.alberta.ca — power engineer(opens in a new tab)
Who does this work

Read each source’s date and scope: a documented role is not proof of a current vacancy or of where every position is based.

Reported as ENMAX states it. ENMAX has not reviewed or endorsed this page.

Sources and course fit

Sources checked 18 Oct 2026

Organization claims are reported as the organization states them. ENMAX has not reviewed or endorsed this page.

What we know, and how
TypeClaimHow we know
workENMAX operates Shepard Energy Centre, a combined-cycle natural-gas generating facility in southeast Calgary, through a joint venture with Capital Power. Its generation information describes gas turbines and a steam turbine. The classroom story follows the energy: exhaust heat from the first stage helps produce additional electricity in the next. It does not present this as zero-emission or loss-free generation.Source: enmax.com — natural gas fuelled; enmax.com — generation; enmax.com — careers; alis.alberta.ca — power engineerCompany-stated work with source limits preserved
local connectionCompany identifies Shepard Energy Centre in southeast Calgary; joint venture with Capital Power, operated by ENMAX.Source: enmax.com — natural gas fuelled; enmax.com — generation; enmax.com — careers; alis.alberta.ca — power engineerSource-backed Calgary connection
course fitThe program explicitly uses thermal power plants and technological energy conversions. Combined-cycle equipment provides a concrete application; plant-specific performance is not asserted.Source: education.alberta.ca — science10.pdfEditorial application of source-checked curriculum concepts
limitsDo not claim an available site visit, guaranteed co-op placement or product efficiency. Keep joint-venture ownership and ENMAX's operator role clear.Source: enmax.com — natural gas fuelled; enmax.com — generation; enmax.com — careers; alis.alberta.ca — power engineerScope of this example

Solid green: the organization states it. Outlined: seen in a dated source. Dashed: our interpretation, not yet researched, or announced but not yet real.